|
| |
| FULL SERVICE METROLOGY LAB |
| |
| We are a full service calibration lab with three offices that are fully staffed to handle all of your in-house and field service needs. We are proud to be ISO 9001 Registered and ISO / IEC 17025 Accredited. All of our offices use similar standards, equipment, computers, software and procedures to ensure the highest quality of service to our customers. Our professional technicians are eager to perform calibration services either in our lab or at your facility to save you money and reduce down-time. |
For speedy customer service, contact:
Jennifer Penza at Jennifer@FoxValleyMetrology.com or (262) 369-3990 (all offices)
To request a quote or schedule an on-site visit contact:
Mark Toll at Mark@FoxValleyMetrology.com (corporate office)
Chris Kuczynski at Chris@FoxValleyMetrology.com (northern office)
Caleb Pohlman at Caleb.Pohlman@FoxValleyMetrology.com (southern office)
PRESS RELEASE
Fox Valley Metrology adds foundry service equipment, expanding our service and product line with extensive Foundry Sand Test capabilities. CLICK HERE to read the press release.
For your industrial calibration service needs contact:
Mark Toll at Mark@FoxValleyMetrology.com
Go paperless and don't go back! Fox Valley Metrology remains the innovator of "Paperless Certifications" with new features added monthly. Certifications are now downloadable in Adobe's Portable Document Format (PDF) and have added new search engines for enhanced customer ease.
Fox Valley Metrology continues to set itself apart from other calibration labs. In order to maintain this we need our customers' input. Please Provide Feedback to us by filling out the request with any comments you may have.
SOUTHERN OFFICE HAS MOVED & EXPANDED In four short years, our 2,000 sq.ft. office on Wolfner Drive in Fenton Missouri has become too small to contain us! We have officially moved around the corner to an office on Axminister Drive that has nearly 5,000 sq.ft. of space.
This added space is allowing us to spread our wings and expand our capabilities. We are immediately adding a Zeiss Eclipse coordinate measurement machine (CMM) to our new lab, giving us the ability to precisely inspect the dimensions of your large fixtures and custom parts.
Don't forget to visit us and direct all shipments to:
308 Axminister Drive
Fenton, MO 63026
|
